600 watt transient voltage suppressor www. microsemi . com scottsdale division smbjp6ke6.8 thru smbjp6ke200ca, e3 and smbgp6ke6.8 thru smbgp6ke200ca, e3 smbj(g)p6ke6.8-200ae3 description appearance this smbjp6ke and smbgp6ke series is an economical surface mount version of the popular p6ke axial-leaded series of 600 w transient voltage suppressors (tvss). it is available in both unidirecti onal and bi-directional configurations for protecting voltage-sensitive components from destruction or degradation. response time of clamping action is virtually instantaneous. as a result, they may also be used effectively for protection from esd or eft per iec61000-4-2 and iec61000-4-4 or for inductive switching environments and induced rf. they can also be used for protecting other sensitive components from secondary lightning effects per iec61000- 4-5 and class levels defined herein. mi crosemi also offers numerous other tvs products to meet higher and lower power demands and special applications. note: all smb series are equivalent to prior sms package identifications. microsemi scottsdale division page 1 copyright ? 2007 6-21-2007 rev c important: for the most current data, consult microsemi?s website: http://www.microsemi.com features applications / benefits ? economical tvs series for surface mount ? available in both unidirectional and bidirectional (add c or ca suffix to part number for bidirectional) ? selections for 6.8 to 200 volts breakdown (v br ) ? fast response ? optional 100% screening for avionics grade is available by adding ma prefix to part number for added 100% temperature cycle -55 o c to +125 o c (10x) as well as surge (3x) and 24 hours htrb with post test v z & i r (in the operating direction for unidirectional or both directions for bidirectional) ? options for screening in accordance with mil-prf- 19500 for jan, jantx, and jantxv are available by adding mq, mx, or mv prefixes respectively to part numbers. ? axial-lead (thru-hole) equivalents available as p6ke6.8 to p6ke200ca (consult factory for other options) ? moisture classification is level 1 with no dry pack required per ipc/jedec j-std-020b ? rohs compliant devices available by adding an ?e3? suffix. ? suppresses transients up to 600 watts @ 10/1000 s (see figure 1) ? protects sensitive components such as ic?s, cmos, bipolar, bicmos, ecl, dtl, t 2 l, etc. ? protection from switching transients & induced rf ? compliant to iec61000-4-2 and iec61000-4-4 for esd and eft protection respectively ? secondary lightning protection per iec61000-4-5 with 42 ohms source impedance: class 1: smbj(g)p6ke6.8 to 130a or ca class 2: smbj(g)p6ke6.8 to 68a or ca class 3: smbj(g)p6ke6.8 to 36a or ca class 4: smbj(g)p6ke6.8 to 18a or ca ? secondary lightning protection per iec61000-4-5 with 12 ohms source impedance: class 1: smbj(g)p6ke6.8 to 43a or ca class 2: smbj(g)p6ke6.8 to 22a or ca maximum ratings mechanical and packaging ? peak pulse power dissipation at 25 o c: 600 watts at 10/1000 s (also see fig 1,2, and 3). ? impulse repetition rate (duty factor): 0.01% ? t clamping (0 volts to v (br) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional ? operating and storage temperature: -65 o c to +150 o c ? thermal resistance: 25 o c/w junction to lead, or 90 o c/w junction to ambient when mounted on fr4 pc board (1oz cu) with recommended footprint (see last page) ? steady-state power dissipation: 5 watts at t l = 25 o c, or 1.38 watts at t a = 25 o c when mounted on fr4 pc board with recommended footprint ? forward voltage at 25 o c: 3.5 volts maximum @ 50 amp peak impulse of 8.3 ms half-sine wave (unidirectional only) ? solder temperatures: 260 o c for 10 s (maximum) ? case: void-free transfer molded thermosetting epoxy body meeting ul94v-0 ? finish: tin-lead plated or rohs compliant annealed matte-tin plating over copper and readily solderable per mil-std-750, method 2026 ? marking: body marked without smbj or smbg part number prefix, e.g. p6ke6.8a, p6ke6.8ae3, p6ke36, p6ke200ca, p6ke200cae3, etc. ? polarity: band denotes cathode. bidirectional not marked ? weight: 0.1 grams (approximate) ? tape & reel option: standard per eia-481-1-a with 12 mm tape, 750 per 7 inch reel or 2500 per 13 inch reel (add ?tr? suffix to part number) ? see package dimensions on last page 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
600 watt transient voltage suppressor www. microsemi . com scottsdale division smbjp6ke6.8 thru smbjp6ke200ca, e3 and smbgp6ke6.8 thru smbgp6ke200ca, e3 smbj(g)p6ke6.8-200ae3 electrical characteristics breakdown voltage v (br) min. nom. max. test current i (br) rated standoff voltage v wm max standby current i d @ v wm max clamping voltage v c @ i pp peak pulse current i pp temperature coefficiant of v (br) v(br) microsemi part number (add smbj or smbg prefix) v dc v dc v dc ma v a v a % / o c p6ke6.8 p6ke6.8a p6ke7.5 p6ke7.5a 6.12 6.45 6.75 7.13 6.8 6.8 7.5 7.5 7.48 7.14 8.25 7.88 10 10 10 10 5.5 5.8 6.05 6.4 1000 1000 500 500 10.8 10.5 11.7 11.3 56 57 51 53 .057 .057 .061 .061 p6ke8.2 p6ke8.2a p6ke9.1 p6ke9.1a 7.38 7.79 8.19 8.65 8.2 8.2 9.1 9.1 9.02 8.61 10 9.55 10 10 1 1 6.63 7.02 7.37 7.78 200 200 50 50 12.5 12.1 13.8 13.4 48 50 44 45 .065 .065 .068 .068 p6ke10 p6ke10a p6ke11 p6ke11a 9.0 9.5 9.9 10.5 10 10 11 11 11 10.5 12.1 11.6 1 1 1 1 8.1 8.55 8.92 9.4 10 10 5 5 15 14.5 16.2 15.6 40 41 37 38 .073 .073 .075 .075 p6ke12 p6ke12a p6ke13 p6ke13a 10.8 11.4 11.7 12.4 12 12 13 13 13.2 12.6 14.3 13.7 1 1 1 1 9.72 10.2 10.5 11.1 5 5 5 5 17.3 16.7 19 18.2 35 36 32 33 .078 .078 .081 .081 p6ke15 p6ke15a p6ke16 p6ke16a 13.5 14.3 14.4 15.2 15 15 16 16 16.5 15.8 17.6 16.8 1 1 1 1 12.1 12.8 12.9 13.6 1 1 1 1 22 21.2 23.5 22.5 27 28 26 27 .084 .084 .086 .086 p6ke18 p6ke18a p6ke20 p6ke20a 16.2 17.1 18 19 18 18 20 20 19.8 18.9 22 21 1 1 1 1 14.5 15.3 16.2 17.1 1 1 1 1 26.5 25.2 29.1 27.7 23 24 21 22 .088 .088 .090 .090 p6ke22 p6ke22a p6ke24 p6ke24a 19.8 20.9 21.6 22.8 22 22 24 24 24.2 23.1 26.4 25.2 1 1 1 1 17.8 18.8 19.4 20.5 1 1 1 1 31.9 30.6 34.7 33.2 19 20 17 18 .092 .092 .094 .094 p6ke27 p6ke27a p6ke30 p6ke30a 24.3 25.7 27 28.5 27 27 30 30 29.7 28.4 33 31.5 1 1 1 1 21.8 23.1 24.3 25.6 1 1 1 1 39.1 37.5 43.5 41.4 15 16 14 14.4 .096 .096 .097 .097 p6ke33 p6ke33a p6ke36 p6ke36a 29.7 31.4 32.4 34.2 33 33 36 36 36.3 34.7 39.6 37.8 1 1 1 1 26.8 28.2 29.1 30.8 1 1 1 1 47.7 45.7 52 49.9 12.6 13.2 11.6 12 .098 .098 .099 .099 p6ke39 p6ke39a p6ke43 p6ke43a 35.1 37.1 38.7 40.9 39 39 43 43 42.9 41 47.3 45.2 1 1 1 1 31.6 33.3 34.8 36.8 1 1 1 1 56.4 53.9 61.9 59.3 10.6 11.2 9.6 10.1 .100 .100 .101 .101 p6ke47 p6ke47a p6ke51 p6ke51a 42.3 44.7 45.9 48.5 47 47 51 51 51.7 49.4 56.1 53.6 1 1 1 1 38.1 40.2 41.3 43.6 1 1 1 1 67.8 64.8 73.5 70.1 8.8 9.3 8.2 8.6 .101 .101 .102 .102 p6ke56 p6ke56a p6ke62 p6ke62a 50.4 53.2 55.8 58.9 56 56 62 62 61.6 58.8 68.2 65.1 1 1 1 1 45.4 47.8 50.2 53 1 1 1 1 80.5 77 89 85 7.4 7.8 6.8 7.1 .103 .103 .104 .104 p6ke68 p6ke68a p6ke75 p6ke75a 61.2 64.6 67.5 71.3 68 68 75 75 74.8 71.4 82.5 78.8 1 1 1 1 55.1 58.1 60.7 64.1 1 1 1 1 98 92 108 103 6.1 6.5 5.5 5.8 .104 .104 .105 .105 p6ke82 p6ke82a p6ke91 p6ke91a 73.8 77.9 81.9 86.5 82 82 91 91 90.2 86.1 100 95.5 1 1 1 1 66.4 70.1 73.7 77.8 1 1 1 1 118 113 131 125 5.1 5.3 4.5 4.8 .105 .105 .106 .106 microsemi scottsdale division page 2 copyright ? 2007 6-21-2007 rev c 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
600 watt transient voltage suppressor www. microsemi . com scottsdale division smbjp6ke6.8 thru smbjp6ke200ca, e3 and smbgp6ke6.8 thru smbgp6ke200ca, e3 smbj(g)p6ke6.8-200ae3 3 breakdown voltage breakdown voltage v (br) v (br) min. nom. max. min. nom. max. test current test current i (br) i (br) rated standoff voltage rated standoff voltage v wm v wm max standby current max standby current i d @ v wm i d @ v wm max clamping voltage max clamping voltage v c @ i pp v c @ i pp peak pulse current peak pulse current i pp i pp temperature coefficiant temperature coefficiant of v (br) of v (br) v(br) v(br) microsemi part number (add smbj or smbg prefix) v dc v dc v dc ma v a v a % / o c p6ke100 p6ke100a p6ke110 p6ke110a 90 95 99 105 100 100 110 110 110 105 121 116 1 1 1 1 81 85.5 89.2 94 1 1 1 1 144 137 158 152 4.2 4.4 3.8 3.4 .106 .106 .107 .107 p6ke120 p6ke120a p6ke130 p6ke130a 108 114 117 124 120 120 130 130 132 126 143 137 1 1 1 1 97.2 102 105 111 1 1 1 1 173 165 187 179 3.5 3.6 3.2 3.3 .107 .107 .107 .107 p6ke150 p6ke150a p6ke160 p6ke160a 135 143 144 152 150 150 160 160 165 158 176 168 1 1 1 1 121 128 130 136 1 1 1 1 215 207 230 219 2.8 2.9 2.6 2.7 .108 .108 .108 .108 p6ke170 p6ke170a p6ke180 p6ke180a 153 161 162 171 170 170 180 180 187 179 198 189 1 1 1 1 138 145 146 154 1 1 1 1 244 234 258 246 2.5 2.6 2.3 2.4 .108 .108 .108 .108 p6ke200 p6ke200a 180 190 200 200 220 210 1 1 162 171 1 1 287 274 2.1 2.2 .108 .108 consult factory for higher voltages. for bidirectional constr uction, indicate a c or ca suffix after part number , i.e. smbjp6ke200ca. for rohs compliant const ruction, indicate an ?e3? suffix after part number, i.e. smbjp6ke200cae3. capacitance will be one-half that shown in figure 4. symbols & definitions symbol definition symbol definition v wm working peak (standoff) voltage i pp peak pulse current p pp peak pulse power v c clamping voltage v (br) breakdown voltage i (br) breakdown current for v (br) i d standby current graphs 50 30 20 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 p pp ? peak pulse power ? kw t c = 25 o c 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 1000 10,000 test waveform parmeters: tr=10 s, tp=1000 s tw ? pulse width - s figure 2 figure 1 pulse waveform for microsemi scottsdale division page 3 copyright ? 2007 6-21-2007 rev c peak pulse power vs. pulse time exponential surge 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
600 watt transient voltage suppressor www. microsemi . com scottsdale division smbjp6ke6.8 thru smbjp6ke200ca, e3 and smbgp6ke6.8 thru smbgp6ke200ca, e3 smbj(g)p6ke6.8-200ae3 c ? capacitance - picofarads peak pulse power ( p pp ) or continuous power i n p ercent of 25 o c rating t l lead temperature o c v (br) - breakdown voltage ? volts figure 3 - derating curve figure 4 ? smbj(g)p6ke series typical capacitance vs. breakdown voltage package dimensions smbj smbg a b c d e f k l min .077 .160 .130 .205 .077 .235 .015 .030 max .083 .180 .155 .220 .104 .255 .030 .060 dimensions in millimeters min 1.96 4.06 3.30 5.21 1.95 5.97 .381 .760 max 2.10 4.57 3.94 5.59 2.65 6.48 .762 1.520 inches mm a .260 6.60 b .085 2.16 c .110 2.79 inches mm a 0.320 8.13 b 0.085 2.16 c 0.110 2.79 smbj smbg microsemi scottsdale division page 4 copyright ? 2007 6-21-2007 rev c 8700 e. thomas rd. po box 1390, scottsdale, az 85252 usa, (480) 941-6300, fax: (480) 947-1503
|
